CS_P02: Two-Part Mold Making and Cold Casting

Box molds are a simple and versatile way to get started with resin casting. But they have one big problem. What if your positive doesn’t have a flat side to glue to the bottom of the mold box?

That’s where two-part molds come in. Two-part molds allow you to cast positives with more complex shapes. They also allow you to cast hollow pieces using a technique called slush casting.

This hands-on class will teach you everything you need to know to make a two-part mold: building a clay bed, mounting your positive, properly applying for mold release, pouring the two parts of the mold, and more.

Note: This class has three half-hour-long periods waiting for rubber and mold release to cure. You should bring a side project to work on during these times.

Prerequisite: Mold Making and Plastic Casting 101 class is required for those NEW to mold making and casting. This is really important folks. If you have little or no experience working with resins or mold making, please start with the 101.

Recommended Clothing: The materials used in this class will permanently bond to anything they get on. It is strongly recommended you wear old work clothes and shoes you won't mind getting stained.

Instructor: Steve Fritzinger